Industrial Vacuum Specifications

Positive Displacement Type Vacuum Producers:
SUTORBILT 8000Q Series Typical Setup

Typical Letter of Quotation SUTORBILT 8000Q Series

The vacuum producer shall be a SUTORBILT low noise rotary lobe type, model 1030 - 8000Q. This exhauster shall be belt driven with a 250 Hp TEFC 1800 RPM 460/3/60 premium efficiency motor and shall generate 5000 icfm @ 15.0 inches Hg. max. with 215 BHP. This exhauster shall be shipped with the following:

• heavy duty casing and end plates with cast rib casing

• stiffeners for high strength

• dual lobe type steel impellers with vibration precision to ISO G2.5 standards

• high performance, superior 5 bearing design, for long service life under severe conditions

• exhaust port noise reduction system

• one (1) heavy structural steel mounting frame.

• one (1) SILEX silencers for exhaust (14" flange outlet connection)

• one (1) 14" SILEX intake silencer

• one (1) SILEX 8" JBBI final discharge exhaust air silencer (secondary) for maximum discharge noise reduction

• one (1) double adjustment motor slide base assembly

• two (2) 14" pipe vibration isolators

• one (1) TECHNO 14" exhaust check valve

• one (1) KUNKLE 4" precision-opening vacuum relief valve (15" Hg. set point)

• one (1) set sheaves, belts, and OSHA belt guard

• one (1) WINTERS 0-30" Hg. vacuum gauge, 4" dial

• one (1) 22" inline filter c/w 6000 cfm cartridge to protect blower and environment from primary filter failure

• one (1) DWYER #2020 0 - 20" SP magnehelic for above filter

• one (1) DWYER #1950-20 3 - 20" SP differential pressure switch across the above filter to shut down blower (NEMA 7) broken bag detector.

The blower shall be supplied with an effective sound enclosure to ensure that the system radiated noise does not exceed 80 dBa at full load. This enclosure shall be equipped as follows:

• one (1) 4000 cfm cooling fan with thermostat control

• one (1) ¾ Hp 1750 rpm, TEFC motor

• four (1) service access hinged doors

• two (2) removable end panels

• fabricated from 14 Ga. painted steel with 4" sound attenuating material

Not included above but strongly recommended, is our exclusive "Reduced Idle Device". This device automatically bleeds air into the system when it detects that no operators are using the system (completely programmable). This device is exclusive to Northwind Air Systems and provides the following benefits:

• reduces the amperage draw by approximately HALF when no operators are using the system

• extends expected service life of the vacuum producer by lowering its average load conditions

• reduces high exhaust temperature shut downs in the summer

• it allows operators to easily open inlet valves

To get fast answers to your questions
about our industrial central vacuum systems, 
please call us toll free.

Click here to e-mail your inquiry.
We'll respond to your request quickly!

Industrial Vacuums Home Page
Portable Vacuums | Central Vacuum Systems
Equipment Specifications
Tubing and Fittings | Hose, Tools, and Attachments
About DuroVac | Our Distributors | Contact Us

DuroVac Industrial Vacuums
15 Iris Crescent, 
Brampton, ONTARIO
L6Z 3H8
1- 888- 330- 3365
PHONE: 905-624-4003  FAX: 905-624-4641

See also:
industrial vacuums by air dynamics
industrial vacuum cleaners by industrial air solutions
IAS industrial vacuums
Mist and Dust Collectors
Commercial air filters, air purifiers & air cleaners
Central vacuum systems and industrial vacuums
The PowerLIFT^TM Industrial Vacuum

DuroVacTM and PowerLiftTM are trademarks
of Northwind Air Systems

© 2003-2008 Northwind Air Systems
title: Sutorbilt 8000Q Vacuum Producer Typical Setup