Industrial Vacuum Specifications

Positive Displacement Type Vacuum Producers:
Wallenstein Rotary Vane Series Data Sheet

  
   


WALLENSTEIN
Rotary Vane
with Vacuum Pressure
Reverse

General Design Details

The Wallenstein "Sliding Vane" Rotary Compressor is a positive displacement, low volume, high performance air pump that can operate as either a compressor or a vacuum pump. When operating as a vacuum pump, vacuum ranges down to 28" Hg. with a curve not quite as flat as a liquid ring type compressor.  As a pressure pump, the system attains 15 PSI.

These pumps are primarily used in liquid handling vacuum systems, with the added benefit of being able to pressurize a tank to empty it.

Principles of Operation

This pump consists of a slotted, single rotor mounted between two bearing housings.  The rotor is arranged eccentrically in a cylinder casing so that a crescent shape volume is created between the inlet and the outlet ports (see Figure 1).


Figure 1

Vanes guided in slots are forced against the cylinder wall by centrifugal force.  Air trapped in the air pocket created by the vanes is compressed as the pocket travels in its eccentric path.  Since each pocket of gas is equal in displacement for each revolution, this is a positive displacement pump.

The pump can attain higher sustained vacuum levels than standard rotary lobe pumps because the vanes adjust to thermal expansion.  However, these pumps do run very hot when working at high vacuum.

Cooling the vane tips of these pumps is important.  Cooling may be by forced air over, flood oil or drip oil depending on the service conditions expected.  With oil cooling, smoke can be expected, so smoke control systems may be required.

Wallenstein pumps were first produced in 1969, and were rapidly accepted by the pumping industry because of the pump's simple design and rugged build.  Units are available to 1000 cfm with up to 28" Hg. continuous.

Special Features

  • Robust design suitable for all day contractor use.

  • Continuous duty operation at maximum vacuum

  • Longest vane wear allowance of any other unit on the market means long service life.

  • Unique bearing arrangement allows bearing removal of endplate without disturbing the bearing fit

  • TWO YEAR WARRANTY

 

 Resources
 


To get fast answers to your questions
about our industrial central vacuum systems, 
please call us toll free.

Let's Discuss it!
1 - 888 - 330 - 3365  
Call toll free in the USA and Canada

Click here to e-mail your inquiry.
We'll respond to your request quickly!

 DuroVac Industrial Vacuums

1-888-330-3365

Industrial Vacuums Home Page
Portable Vacuums | Central Vacuum Systems
Equipment Specifications
Tubing and Fittings | Hose, Tools, and Attachments
About DuroVac | Our Distributors | Contact Us

DuroVac Industrial Vacuums
DuroVac Industrial Vacuums
15 Iris Crescent, 
Brampton, ONTARIO
L6Z 3H8
1- 888- 330- 3365
PHONE: 905-624-4003  FAX: 905-624-4641

See also:
industrial vacuums by air dynamics
industrial vacuum cleaners by industrial air solutions
IAS industrial vacuums
Mist and Dust Collectors
Commercial air filters, air purifiers & air cleaners
 Central vacuum systems and industrial vacuums
The PowerLIFTTM Industrial Vacuum

DuroVacTM and PowerLiftTM are trademarks
of Northwind Air Systems

© 2003-2008 Northwind Air Systems
title: Wallenstein Rotary Vane Vacuum Pumps