Small Stationary Central Vacuums

High flow, high vacuum, low cost

Small stationary central vacuums provide a budget-sensitive alternative for your plant without sacrificing performance.

To save on the engineering, mobilization and infrastructural costs of assembling and commissioning a conventional central vacuum system, use these steps to convert our Portable vacuums into Central vacs.

It's easy as 1, 2, 3.
CONFIGURE AND QUOTE

STEP 1: Choose Your Portable to Convert

Using an LT, DVR or DVP offers fast installation, hassle-free commissioning and minimal capital investment cost. These systems come standard with a waste disposal system.

  1. Combine with primary separators and vacuum hoppers to increase waste storage
  2. Intended for up to 5 simultaneous users/operators
  3. Pre-built packages reduce overall engineering costs drastically
  4. Vac producer dependent, tools range up to 2.0’’ ID to handle light-to-moderate clean-ups

Using a PL or an EL offers a powerful alternative. These systems come standard with built-in hopper or Supersac waste disposal.

  1. System can be fully configured to be NFPA compliant with explosion venting, inlet isolation, etc.
  2. Intended for up to 8 simultaneous users/operators
  3. Pre-built packages reduce overall engineering costs drastically
  4. Optional configurations for sound attenuation and power-alternatives

STEP 2: Connect to a Piping Network that Works

Our DuroVac® experts help you connect your vac system to a piping network that never plugs.

  1. Calculate, design and layout based on material characteristics, flowability and plant constraints
  2. Quickly analyze your plant layout to identify key design recommendations
  3. Provide a budgetary quote for a piping network that will never plug!

STEP 3: Select Your Operators' Accessories

You’re good to go!